PREV
NEXT
  • Horizontal operating Control valve test unit

  • Standard equipped with a variety of test systems

  • Quick and easy positioning and clamping

  Test Units for Control Valves  
 

 

Although plant designers intent to treat them as 'necessary evils', it is obvious that Control valves play a key role in the process quality and reliability. Extreme care must be taken to avoid costly premature failures possibly resulting in substantial losses or plant shut-down. Periodical service and testing removes a major obstacle for the plants to operate for longer intervals.

Our Control valve test units are designed and equipped for;

√ High pressure testing.
√ Seat leakage classification according to the ANSI/FCI 70-2.
√ 'Stroking' of the valve and its controls.
√ Total performance testing

The Horizontal operating Control valve test unit 'HC' is completed with strong clamping system for quick and easy positioning and clamping of all common Globe-, Camflex- and Waver type Control valves in horizontal position (valve stem vertical). The U-shaped HC10 Clamp holds a limited clamping force of 10 tons and is therefore used for lower pressure testing only. However, the clamp ensures an excellent accessibility for Control valve (dis) assembly and 'stroking'. The stronger HC's combine the above with high pressure liquid and gas testing. The standard HC is completed with sealing adapters for DIN/ANSI RF flanges, but is also prepared for the use of 'inner seal' adapters for Control valves with But- / Socket weld ends

   



The Ventil Control valve test unit is standard equipped with a variety of test 
systems for the common Control valve test procedure and testing / operating its controls.

Optional features:

√ CR - Windows operated Computer Registrations System.
√ Vacuum – quick filling system, electronic controlled.
√ AVPS – Hand controlled test- and operation systems for actuators.
√ AVPS - Automatic for running a dynamic scan, Step test and a Dump test.
√ Digital seat leakage measuring systems for gas and liquid.
√ Torque test and measuring system 0 - 500,000 Nm.
√ Valve support trolley, mechanical or hydraulic operated.
√ Fully surrounding safety closure.
√ HCA columns in 20° angle.